EN 
Wet scrubber
Cools and washes flue gas to remove selected particles and soluble acid gases. Water treatment and maintenance are planned for the site.
CREMATION TECHNOLOGY FOR TOMORROW
Cremation furnaces for human and animal cremation
A greener way to build cremation capacity.
Advanced cremation furnaces at the heart of a more flexible facility. Discover our technology, carefully controlled processes and greener choices for human and pet cremation.
Electric, gas and hybrid options · configured for your site
GREENCREMA / FURNACE SYSTEMSBuilt around your requirements.
Cleaner process thinking
from furnace to flue
from furnace to flue
ENERGY CHOICEEMISSIONS BY DESIGNPROJECT-SPECIFIC ENGINEERINGHUMAN + PET
→ THE CORE TECHNOLOGY
The right furnace.
For the right facility.
We start with the site, the expected workload and the local permit. Then we specify the furnace, heat source, controls and flue-gas treatment as one working system.
FIXED INSTALLATIONS / HUMAN + PET
More than one route to a lower-impact operation.
Electric operation can be paired with renewable electricity. Gas-fired and hybrid configurations may be better suited to some sites or existing infrastructure. The best choice depends on energy supply, usage pattern, capacity and lifecycle impact.
ElectricPrecise power control and a route to renewable electricity.
Gas / LPGA practical option where electrical capacity is limited.
HybridProject-specific flexibility when more than one energy source is appropriate.
Fuel choice alone does not establish environmental performance. Emissions, energy use and operating costs require project-specific assessment.
CONTROLLED COMBUSTION
One process, carefully watched.
Primary and secondary chambers, controlled air supply and operator-facing controls help create repeatable operating conditions. A properly designed secondary chamber treats combustion gases before the cleaning stages. Temperature, residence time and oxygen are set for the permit and verified at commissioning.
- Operator control and process alarms
- Afterburning and measured operating conditions
- Emissions monitoring specified for the site
PET & LARGER ANIMAL CREMATION
Care matters at every scale.
Cremation systems for pets and larger animals can be configured for fixed facilities. Chamber size, loading and remains-processing equipment are tailored to the animal species, body size and expected workload, with attention to safe handling, dependable operation and locally applicable emissions requirements.
→ ENGINEERED FOR LOCAL LIMITS
Technology for controlled emissions
Modern facilities pair good combustion with cooling, sorbents, filtration and measurement. The final sequence depends on the required pollutants, available space, heat-recovery plan and permit conditions.
CombustionPrimary + secondary chambersControlled temperature, oxygen and residence time
TemperatureRapid gas coolingPrepares gas for downstream treatment; heat recovery may be designed here
CaptureDry sorbent dosingActivated carbon for mercury/dioxins; lime or bicarbonate for acid gases
Targeted optionNOₓ reductionSNCR or SCR where required and technically appropriate
FiltrationBag or ceramic filterCaptures dust and spent reagent before the monitored stack
DESIGNED AGAINST A REAL PERMIT
Different countries. Different numbers.
There is no single EU or US limit table for every crematorium. We specify each system to meet the applicable emissions rules and site permit, with the furnace, controls and gas cleaning engineered together. The values below are regulatory examples, not a performance claim for an untested model.
Regulatory references reviewed September 2026. We monitor changes and recheck the applicable rules and permit conditions for each quotation and before shipment. The treatment sequence above is illustrative; a NOₓ catalyst and its operating temperature require project-specific engineering.
UK / NEW ABATED CREMATOR
5 mg/Nm³particulate matter
30 µg/Nm³mercury
0.1 ng/Nm³dioxins / furans
UK PG 5/2 (25), at 11% O₂, dry gas. The NOₓ limit of 200 mg/Nm³ applies from 4 December 2029. UK source ↗NORWAY / CATEGORY I
20 mg/Nm³particulate matter
0.05 mg/Nm³mercury
850 °C / 1 ssecondary chamber operating condition
Current Category I reference at 11% O₂. Norway opened a consultation on changes in September 2026; the proposal is not yet law. Current regulation ↗ · 2026 consultation ↗GERMANY / HUMAN CREMATORIA
10 mg/Nm³total dust
50 mg/Nm³carbon monoxide · hourly average
0.1 ng/Nm³dioxins / furans
27th BImSchV also sets 20 mg/Nm³ for total organic carbon and at least 850 °C after the last combustion-air feed. Dry gas reference: 11% O₂, or 15% O₂ for electrically operated systems. Pet cremation requires a separate legal review. German regulation ↗UNITED STATES / STATE EXAMPLES
0.05 gr/dscfNew York · new/modified units · particulate
0.080 gr/dscfFlorida · human crematories · particulate
100 ppmFlorida · human crematories · CO, hourly average
These are examples, not national US limits. Both particulate examples use dry gas corrected to 7% O₂; Florida's CO value also uses 7% O₂. Rules and permits vary by state and locality. New York rule ↗ · Florida rule ↗Compliance planned, then verified.For each order, we will agree a written specification covering the applicable requirements, test methods and acceptance criteria. Agreed documentation and factory checks are completed before shipment; independent pre-shipment emissions testing can be arranged when included in the project scope. Final site-permit compliance is confirmed after installation through commissioning and any authority-required stack tests.
→ FLEXIBLE FORMATS
When you need relocatable
units built to demanding requirements
The furnace stays central. The building or transport format follows the service you want to offer, with layout, utilities and permissions defined for the site.
MODULAR / HUMAN
Relocatable chapel
A mobile facility that brings the furnace, operator space and service areas together in a thoughtfully designed module. The final layout can be planned together with us and tailored to your requirements.
CHAPEL / CONCEPT
A more welcoming space
Exterior finishes and farewell areas can be tailored to the surrounding community. The image illustrates a design direction; dimensions and construction are agreed for the project.
MOBILE / PET
Mobile and compact
Trailer or vehicle-based pet systems can support services across approved locations. Weight, fuel, access, power and chimney arrangements are assessed before the transport solution is specified.
→ RELATED SOLUTIONS
Specialised treatment beyond cremation.
Our partner network can discuss systems for biomedical and healthcare waste, including controlled incineration solutions for demanding waste streams. These projects need a separate assessment of waste classification, handling, permits, emissions treatment and operator safety.
Discuss a specialist project→ COMPLETE THE FACILITY
The details that make it work.
A well planned project includes everything around the furnace. Choose the equipment that supports your workflow and the local environmental conditions.
Flue-gas treatment
Sorbent dosing, filters, scrubbers or other stages specified against the permit.
Cremulators
Processing equipment for cremated remains, with dust control and the desired finish.
Loading & handling
Manual or motorised trolleys and transfer arrangements suited to the furnace.
Refrigerated storage
Cold rooms or cabinets sized for capacity, hygiene and site layout.
Heat exchangers
Recovered heat can help warm nearby premises and homes, where a suitable heat distribution connection and local conditions allow.
Monitoring & controls
Operator interfaces, alarms and emissions measurement chosen for the project.
→ YOUR PROJECT, YOUR SPECIFICATION
Start with the need.
Build the answer.
Tell us about the site, the service and the environmental requirements. We can scope the furnace, auxiliaries, layout and test plan together, then prepare a project-specific quotation.
- →Define capacity, fuel and location
- →Agree local limits and the treatment concept
- →Plan building, handling and utilities
- →Confirm specification, price and verification
→ START A CONVERSATION
Tell us about your project.
Complete the details below and your request will appear directly in our private project workspace as a new incoming project.